Waterproof Connector For Electric Vehicle M10 M12 2 3 4 5 6pin Ip67 Wire Connector Cable

 

 

 

 

 

 

 

 

The waterproof cable plug is called the high-efficiency energy-saving power supply. It represents the development direction of stable power supply. It has become a combination of stable power supplies. In the case of high frequency switches, the connected components inside the waterproof plug consume energy. Very low, power service can reach 70-90%, almost twice the linear power plan

 

The disadvantages of the waterproof plug are that the linear power regulator functions well, it can regulate voltage rate, adjust load, output noise and ripple control greatly, and the electromagnetic interference of other electronic structures is simple, and the necessary response speed is processed. Plugging only the waterproof control program can be messy and noisy compared to linear power, but an important advantage is that the waterproof plug has fewer functions in terms of the size and weight of the power function. More power sources, which are manufactured by power sources under similar conditions, greatly reduce the volume ratio of linear power output, and also greatly reduce capital

 

In this way, we do not know the pin connection of the bracket, so it is easy to save the fault. IM10n other words, my measurements are always biased and ultimately fail to suppress the painted PCB connector. I think that’s one of the differences between China and the rest of the world. Generally speaking, the headphone has a three-stage plug. The diameter of the plug is usually 3.5mm and 2.5mm. Plugs of different diameters correspond to headphone sockets with different diameters of holes. Therefore, from a system reliability standpoint, the “male” and “female” should correspond, and the pin and pin 4 should be grounded. In this case, when headphones are not plugged in, place the channel input on the ground and the system input is 0

 

 


Post time: Sep-10-2020