Categories

Contact Us

Shenzhen Kenhon Technology Co.,Ltd
Add: 95 Buildings, Mashan Fifth Industrial Zone, Matian Street, Guangming New District, Shenzhen, Guangdong
Tel: +86-755-27505512
Fax: +86-755-27505502
Ph: +86 18814472173

E-mail:sales2@waterproofplugs.com

Power Electrical 3+2 Waterproof Connector

Power Electrical 3+2 Waterproof Connector


Operation temperature is -40°C~ +105°C,
Save temperature is -25°C~85°C,
Max wire gauge is Φ6.5mm,
Rated voltage is AC 220V,
Rated current is 2~15A,
Waterproof Level up to IP68 Protection grade

Send InquiryChat Now

Product Details

Power Electrical 3+2 Waterproof Connector

Product Description

Power Electrical T Type 3+2 Street Light Connector IP65 Waterproof Connector Cable Plugs 5Pin is our new product and it's also a better product we sell.We are committed to providing you with high quality products and services that best suit you.We firmly believe that your opinion is an important driving force for our perfection.If you are interested in our products or services, please feel free to contact us.All comments or feedback are also appreciated.


We know that the connector manufactured by professional waterproof connector manufacturers is a very precise component, and the quality control of the manufacturer is related to the use value and efficacy of the product.


1. Quality control during stamping


Similar to the general product manufacturing, manufacturers often start from the stamping process. Through the force of some large high-speed punches, the connector can be formed into a stamped shape from the original thin metal. In the POGOPIN manufacturer's production process, one end of the large-volume metal strip can be fed into the front end of the press, and the other end can be hydraulically passed through the press and wrapped in the take-up reel, which is pulled out by the take-up reel and rolled out. Finished product. In this process, the product is guaranteed to have no quality problems, and it can effectively avoid such problems as scratching and curling.


2, connector manufacturers of plating control


The connector pins are typically sent to the plating immediately after being stamped. At this stage, it is treated in the same way as the previous stamping phase. Let the pin be twisted, chipped or deformed, so that the better pin can be sent into the electroplating equipment. The Hushan electronics manufacturer will not only have uniform plating and normal color plating during the electroplating process, but also the meeting. Adjust it according to the actual situation.


3. Strict testing standards


After the completion of production and processing, there will be a process to test the quality and performance of the product, so that it can be reasonably adjusted and controlled according to the test results to ensure that it meets the corresponding requirements.


Product Show

Please Contact Amy:

Email:sales2@waterproofplugs.com

Tel: +86 18877499652

Wechat : IRS1203

LinkedIn : 18877499652

Whatsapp: 18877499652

Skype: 18877499652


Inquiry