Categories

Contact Us

Shenzhen Kenhon Technology Co.,Ltd
Add: 95 Buildings, Mashan Fifth Industrial Zone, Matian Street, Guangming New District, Shenzhen, Guangdong
Tel: +86-755-27505512
Fax: +86-755-27505502
Ph: +86 18814472173

E-mail:sales2@waterproofplugs.com

M8 Black Nut 1-8 Cores Kenhon IP67 Waterproof Wire To Wire Connector Plug

M8 metal head waterproof plug, include the female and male plug connecting. M8 panel waterproof connector: has been widely used in LED lighting, urban outdoor lighting, automation equipment, medical equipment and other industry area and etc .

Send InquiryChat Now

Product Details

Company Profile


Kenhon Technology Co., Ltd. is a new type of enterprise integrating production, R&D and sales. The company mainly produces waterproof joint connectors and waterproof joints.

 

 The company adheres to the "integrity-based, quality first" business philosophy, "to provide customers with quality products, to provide users with the safest products" as the goal. Strive to build the first-class quality of the domestic waterproof wire industry.


  The company pays attention to the development of new products, and is willing to develop and produce waterproof connectors for special specifications of wire rods for customers, such as environmental protection power supply waterproof lines certified by VDE, CCC, UL and other safety standards;

  Superior production environment, sophisticated production equipment, professional production team, cast first-class quality, first-class speed, first-class service. Welcome customers at home and abroad to consult and negotiate.


LED display waterproof connector is suitable for mounting inserts: The coefficient of linear expansion is small, and the connection with the insert is still firm after the temperature changes.

   High dimensional stability: During specific use, the creep is small and does not warp after being stressed. After heating, the expansion is small. It is generally required that the dimensional accuracy of the pitch between the contacts be maintained at level 6.

   Processing fluidity is good: Meet the requirements of the increasingly smaller size of electronic connectors.

  Good solvent resistance: Plastic parts should not be corroded and cracked when exposed to solvents.

   Corrosive gases are not produced: Plastic parts should not be corrosive to the silver plating during use to prevent the electrical conductivity of the connector contacts from affecting.


How to choose a good fit connector.


Good electrical conductivity: For low-frequency connectors, high insulation resistance and high dielectric strength are required. The insulation resistance between the joints and the ground should be greater than 1 Ω. Under the low voltage of 0.44 MPa, the test voltage should be 500V. And breakdown phenomenon. For the high-frequency connector, in addition to meeting the above requirements, the high-frequency dielectric loss is required to be small, and the dielectric constant is small.

High temperature resistance: Generally, the heat distortion temperature should be above 200 °C to resist the high temperature during surface mounting technology or welding, and to withstand the heating temperature of the connector itself.

Good arc resistance: It is guaranteed to resist the damage of plastic caused by the arc generated during the plug installation.

Good flame retardancy: Prevent fires from occurring under abnormal conditions such as short circuit. In order to avoid the harm of toxic gases to human body, it is best to use halogen-free flame retardant materials.

Excellent physical properties: good toughness, to prevent thrust; high bending strength to prevent deformation; specific test conditions are under a certain vibration and shock conditions (vibration frequency 20 ~ 60Hz, acceleration 5g), insert and remove 500 plastic parts No mechanical damage or cracking occurs.



Showcase:




Our Services

 

1. Quick Response

 

2. Professional Manufacture

 

3. OEM/ODM available

 

4. Fast Delivery


Inquiry