Contact Us

Shenzhen Kenhon Technology Co.,Ltd
Add: 95 Buildings, Mashan Fifth Industrial Zone, Matian Street, Guangming New District, Shenzhen, Guangdong
Tel: +86-755-27505512
Fax: +86-755-27505502
Ph: +86 18814472173

M7 Waterproof 2P LED E-bike IP65 Waterproof Cable Male Female Plug Connector

The M7 is a mini waterproof connector that is mainly used on LEDs and e-bikes, but since our products are all custom-made, there is no inventory, but this has the advantage that we can follow the customer's needs. To produce products and samples.

Send InquiryChat Now

Product Details

M7 Waterproof 2P LED E-bike IP65 Waterproof Cable Male Female Plug Connector

The M7 is a mini waterproof connector for LED and electric bikes, but since our products are custom-made and not stocked, the benefit of this is that we can meet the needs of our customers. The wire of our products is available in PVC, rubber wire and Teflon wire. There are 24AWG and 26AWG wire specifications. There is no certain wire length. There is also the color of the wire we can also accept the customization, in short, we will do our best to meet the customer's requirements.

This product is still exploding this year. Originally, our company did not have this model. Because there are too many customers to consult, we only open the mold, which is convenient for our customers and convenient for ourselves. Our company's products are globally oriented, so you can ask me if you need it.

Referred to as PVC, a thermoplastic resin obtained by polymerizing vinyl chloride under the action of an initiator. It is a homopolymer of vinyl chloride. The vinyl chloride homopolymer and the vinyl chloride copolymer are collectively referred to as vinyl chloride resins. PVC is a white powder with an amorphous structure and a small degree of branching. Industrial production of PVC molecular weight is generally in the range of 50,000 to 120,000, with greater polydispersity, molecular weight increases with the decrease of polymerization temperature; no fixed melting point, 80-85 ° C begins to soften, 130 ° C becomes viscoelastic state , 160 ~ 180 ° C began to transform into a viscous flow state; has good mechanical properties, tensile strength of about 60MPa, impact strength of 5 ~ 10kJ / m2; has excellent dielectric properties. However, the stability to light and heat is poor. When it is exposed to sunlight above 100 °C or exposed to sunlight for a long time, it will decompose to produce hydrogen chloride, and further autocatalytic decomposition, causing discoloration, and physical and mechanical properties are also rapidly declining. In practice, it is necessary to add stability. Agent to improve the stability to heat and light. PVC is very hard and has poor solubility. It can only be dissolved in a few solvents such as cyclohexanone, dichloroethane and tetrahydrofuran. It is stable to organic and inorganic acids, alkalis and salts, and its chemical stability increases with the use temperature. And lower. PVC is dissolved in acetone-carbon disulfide or acetone-benzene mixed solvent, used for dry spinning or wet spinning to form fibers, called polyvinyl chloride. It is flame retardant, acid and alkali resistant, resistant to microorganisms, abrasion resistant and has good heat retention and elasticity.

PHOTOS of M7 2P Mini



If you like our products, you can always contact us, of course, you can also consult online, as long as we are online, we will respond in time.