M6 Mini 5Pin Wire To Wire Electric Waterproof Connector Male & Female Plugs & Sockets For LED
M6 is the mini series in our waterproof cable, Operation temperature is -40°C~ + 105°C, Save temperature is -25°C~85°C, Max wire gauge is ≤4.5mm, Rated voltage is AC250V, Rated current is ≤2A, there have 2 pin to 6 pin, same there have 2 core to 6 core, higher to IP 67 Protection grade, M6 waterproof cable can use for LED light and the other similar products.Send InquiryChat Now
M6 Mini 5Pin Wire to Wire Electric Waterproof Connector Male & Female Plugs & Sockets for LED
LED waterproof connector classification
LED waterproof connectors will be specifically classified as fixed connection media. According to this classification scheme, there will be three basic types of connectors: wire-to-wire, wire-to-board and board-to-board. The structure of the three types of connectors. These three types of connections are not completely different.
. Wire-to-wire connection.
The wire-to-wire connection also includes a wire-to-wire or cable-to-cable form, which is characterized by two single-wire individuals or corresponding wires of two cables being permanently connected to each other. These permanent connections are more commonly found in fixed connection center-to-wire connections and IDC connections. Crimp connections are common in discontinuous wire connectors. IDC is often used to control cable connectors because of its superiority in wire-related and wire-end processing. Wire-to-wire connectors have a wide variety of geometric shapes. Supporting members such as plastic parts of right angle and round polymeric shape, as well as plastic parts and metal shielded casings of a combination of many different shapes, are mainly used in the military.
. Board to board connection.
Two types of board-to-board connectors have been mentioned previously, as shown in Figure 1.12, one being a single-piece connector or being a card edge and the other being a two-piece connector. The first board-to-board connector is placed on the edge of the board, so called the card edge, which will eventually become a two-piece connector, because the technical performance and size of the printed circuit board is growing, as the board size increases, As a result, the capacity of the connector is increased, and the number of terminals is increased, the plugging force of the connector is increased, and the capacity of the circuit board printed circuit is increased, which causes the line density to be too large, and the single-chip connector is difficult to meet the requirements. It will eventually evolve into a two-piece connector.
|Business Type:||Industry and Trade Integration|
|Product NO:||M6 Mini 5Pin|
|Gender:||Male & Female|
Showcase of the product M6 mini
How to choose the LED waterproof connector correctly
The LED waterproof connector is actually a LED waterproof connector. It has a lightweight external design, which is better for concealing itself and its use. The connector housing plastic is made of environmentally-friendly and recyclable engineering materials. The PIN pin is machined and machined with gold plating. The electrical connection is more stable and reliable. The contact resistance is lower, which reduces the energy loss of the system. It truly achieves environmental protection and energy saving and has a wide range of applications. The operation of the LED waterproof connector will affect the function of the entire device, and the selection needs to be correct.
Temperature, humidity, and other environmental conditions are determined by the location of the joint, so the location and expected environment should be considered. And the shelf life of other relevant storage conditions and what the information is. The description of the environment should also cover requirements for shock and vibration, including requirements for shipping and environmental conditions such as welding temperature and duration of the welding cycle.
1. Quick Response
2. Professional Manufacture
3. OEM/ODM available
4. Fast Delivery