M18 4Pin LED Female To Male Sensor Cable Waterproof LED Connector IP67
M18 4Pin LED Female to Male Sensor Cable Waterproof LED Connector IP67 is our new product and it's also a better product we sell.We are committed to providing you with high quality products and services that best suit you.We firmly believe that your opinion is an important driving force for our perfection.If you are interested in our products or services, please feel free to contact us.All comments or feedback are also appreciated.Send InquiryChat Now
Connector reliability test project and its test standard
The specific test items of the connector are as follows:
(1) Connector insertion force test
Reference standard: EIA-364-13
Purpose: To verify that the plug-in force of the connector meets the product specifications.
Principle: The connector is fully inserted or pulled out at a specified rate, and the corresponding force value is recorded.
(2) connector durability test
Reference standard: EIA-364-09
Purpose: To evaluate the effect of repeated insertion and removal on the connector and simulate the insertion and removal of the connector in actual use.
Principle: The connector is continuously inserted and removed at a specified rate until the specified number of times is reached.
(3) Connector insulation resistance test
Reference standard: EIA-364-21
Purpose: To verify whether the insulation performance of the connector meets the requirements of circuit design or when subjected to environmental stress such as high temperature and humidity, whether the resistance value meets the requirements of relevant technical conditions.
Principle: A resistor is applied to the insulating portion of the connector to cause a leakage current to appear on the surface or inside of the insulating portion.
Tel: +86 15278464730
Wechat : h1157951802