IP68 2 Pin Male and Female Waterproof Connectors M16 Electrical Cable Wire is our new product and it's also a better product we sell.We are committed to providing you with high quality products and services that best suit you.We firmly believe that your opinion is an important driving force for our perfection.If you are interested in our products or services, please feel free to contact us.All comments or feedback are also appreciated.
Waterproof connector performance test
The test needs to test the project: electric strength, insulation resistance, contact resistance, salt spray test, waterproof performance, contact separation force, mechanical life, mutual compatibility, test method. Waterproof connector test requirements:
1. Waterproof performance: Under normal temperature and normal pressure, the male and female connectors of the waterproof connector are inserted into the nut and placed in 1m deep clear water. The test time is 4 hours, and there is no water seepage inside the connector. After standing for 30 minutes under constant pressure, the test for electric strength, insulation resistance and contact resistance are all required.
2. Contact separation force: single hole separation force is 1.0-4.0N.
3. Mechanical life: According to the GJB1217-1991 method of 2016, the contact pieces are inserted and removed 3000 times. The friction surface of the contact parts allows the coating to be slightly worn, but the base metal is not exposed, and there is no mechanical damage affecting the performance. The contact resistance is in accordance with the requirements of Test Section 3.3.
4. Mutual compatibility: Free connectors and fixed connectors of the same model specification should be fully inserted and separated.
5. Test method: Unless otherwise specified, normal temperature and pressure refer to temperature 15 ° C ~ 35 ° C, relative humidity 45% ~ 75%, atmospheric pressure 86 KPa ~ 106 KPa.
Tel: +86 18877499652
Wechat : IRS1203
LinkedIn : 18877499652