Contact Us

Shenzhen Kenhon Technology Co.,Ltd
Add: 95 Buildings, Mashan Fifth Industrial Zone, Matian Street, Guangming New District, Shenzhen, Guangdong
Tel: +86-755-27505512
Fax: +86-755-27505502
Ph: +86 18814472173

Male Female Plug LED Waterproof Connector

Operation temperature is -40°C~ +105°C,
Save temperature is -25°C~85°C,
Max wire gauge is Φ6.5mm,
Rated voltage is AC 220V,
Rated current is 2~15A,
Waterproof Level up to IP68 Protection grade

Send InquiryChat Now

Product Details

Product Description

High Quality Male Female Plug Wire 4Pin LED Waterproof Connector Cable M12 is our new product and it's also a better product we sell.We are committed to providing you with high quality products and services that best suit you.We firmly believe that your opinion is an important driving force for our perfection.Please feel free to contact us.All comments or feedback are also appreciated.

You can judge the quality of the M12 4pin waterproof connector according to the following aspects. As long as you have your own judgment, you can know that our products will definitely satisfy you.

First , the gold layer color is not normal

The color of the gold-plated layer of the pogo pin connector is inconsistent with the normal gold layer color, or the gold layer color of different parts in the same accessory product.

Secondly . Influence of raw material impurities

When the impurities introduced into the plating solution exceed the tolerance of the gold plating solution, the color and brightness of the gold layer will be affected quickly. If it is affected by organic impurities, the gold layer will appear dark and faint. Slice check dark and flower position

The setting is not fixed. If the metal impurities interfere, the effective range of current density will be narrowed. The Haoer trough test shows that the current density of the test piece is not bright at the low end or the high-end plating is not bright and the low end is not plated. The coating is red or even black, and its holes

The color change inside is more obvious.

Thirdly the current density is too large

Since the total area of the plated parts is incorrectly calculated, the value is larger than the actual surface area, so that the amount of gold plating current is too large, or the amplitude of the gold plating is too small when the plated gold is used, so that all or part of the gold plating in the groove is crystallized, and the gold is visually observed. The layer is red.

Product Show

connector m12 4pin

Please contact Amy:

Wechat : IRS1203

Tel/LinkedIn /Whatsapp : +86 18877499652