What Should be Considered During the Installation of the Waterproof Connector
To achieve waterproof function, the waterproof connector must ensure that the docking interface and each interface can achieve the sealing function.
The waterproof connector structure is divided into two parts: plug and socket. When used normally, the socket is installed on the instrument and is fixed by the mounting flange. The plug structure is in the form of cable, which can be docked with the socket to realize the transmission function. The butt end has a rectangular rubber ring, the two ends are arranged on the mounting threaded holes, and the tail end is sealed and sealed by epoxy resin.
When installing, use two mounting screws. After the board is installed, the socket is fixed on the mounting board. The rectangular sealing ring on the socket is compressed under the fastening of the mounting screws to seal and waterproof. The other end of the waterproof connector uses a waterproof clip to fix the connector plug. The plug is installed in the waterproof clip. The mounting screws at both ends of the clip pass through the connector plug, and a large seal is provided at the mating end of the waterproof clip. ring.
When the plug is docked with the socket, the mounting screws at both ends of the clip are docked with the internal threads of the hexagonal mounting screws on the panel, and the connector plug and the socket are inserted under the action of the mounting screw; at the same time, the waterproof clip is butted. The rectangular sealing ring is compressed by the mounting panel to achieve the sealing and waterproof function of the connector docking interface.